Explorer Se Pro Minelab Metal Detector
- Full Band Spectrum™ (FBS) multiple frequency technology.
- New lightweight, perfectly balanced waterproof ultra-light & ultra-tough 11" Double-D coil
- NiMH battery pack or 8 x AA Alkaline batteries for long battery life.
- 3rd generation software with faster and more powerful microprocessor.
- Full function advanced programming.
- Unique dual coordinate target profiling with patented SmartfindTM.
- Full ferrous Iron Mask discrimination.
- Easy learning curve with Quickstart Mode.
- Intuitive user interface with large, easy to read target coordinates.
- Fine sensitivity, threshold and volume adjust controls.
Minelab's multiple frequency (FBS) technology is the only technology in the world that provides the serious treasure hunter with both deep detection and deep precision discrimination, regardless of ground conditions and target type.
Minelab’s FBS technology simultaneously transmits 28 multiple frequencies from 1.5kHz to 100kHz. The lower the frequency used by a detector, the deeper it can penetrate. At low frequencies however, the sensitivity to small targets is sometimes reduced. The higher the frequency, the higher the sensitivity to small targets, but higher frequencies will not penetrate the ground as deeply. The increased frequency range of the Explorer SE Pro means more sensitive and accurate target identification at greater depths.
FBS technology also improves the detector's ability to cancel ground mineralisation. Ground balancing is automatic, so whatever the field conditions, the Explorer SE Pro maximises the depth, sensitivity and discrimination.
Serious detectorists understand that every outing is a unique opportunity in time that needs to be enjoyed and maximised. Minelab's Explorer SE Pro detector will handle varying conditions with maximum results!
- Switch on and go detecting, with automatic functions
Eight preset discrimination patterns give you many options to get started. These patterns can be used for detecting coins and jewellery while ignoring nails and pull-tabs.
- Smartfind 2D Discrimination (31 x 31 = 961 segment target resolution)
Program the detector with discrimination patterns to accept good targets or reject junk using 31 ferrous and 31 conductivity Target IDs. Smartfind gives significantly greater target accuracy than standard one dimensional discrimination.
- Take the guesswork out of creating a customised pattern
Use automatic discrimination learning options and sample targets to teach your detector what type of targets you want to accept and reject. Six programmable Patterns and two user modes allow you to easily save your favourite settings.
- Tone ID options for target discrimination
Choose to hear targets based on differences in either ferrous or conductivity properties.
- Lightweight, waterproof 11-inch Double-D coil
This precision engineered coil has improved mechanical stability and greater immunity to electrical noise allowing you to increase sensitivity and achieve greater depth.
- FBS technology
FBS takes BBS to the next level. Find more treasure deeper, using the best multifrequency technology available.
FBS (Full Band Spectrum) simultaneously transmits, receives and analyses a full band of multiple frequencies. This provides the detector’s electronics with even more information about a target and the surrounding environment than is possible with single frequency or BBS technology. This has a number of advantages, including:
Find Every Target Type & Size with Every Sweep
Generally, high transmit frequencies are more sensitive to small targets and low transmit frequencies give more depth on large deep targets. FBS simultaneously transmits and analyses a full band of multiple frequencies from 1.5 kHz to 100 kHz and is therefore sensitive to both very small and large deep targets at the same time. This means you only need to cover the ground once and can be confident you’re not leaving ANY valuable treasure behind.
Automatic Sensitivity & Ground Compensation for Maximum Depth
As you sweep the coil in search of targets, Automatic Sensitivity and Ground Compensation monitor the full band of frequencies for changes in ground mineralisation. Whenever the level of ground mineralisation changes the sensitivity is automatically adjusted to maintain maximum depth. The ground compensation circuitry removes false signals caused by fast changing levels of ground mineralisation. Both of these advanced features work together to maintain maximum detection depth and sensitivity, allowing you to concentrate on listening for targets.
Extremely Accurate Multi-Channel Signal Conversion
FBS uses multiple channelled Sigma-Delta analogue-to-digital converter technology to digitise the analogue signals received by the search coil. This ultra-fast processing, using a digital reference (1 bit DAC), provides the microcontroller (MCU) with detailed information about the ground conditions and targets. This gives FBS the ability to precisely separate target signals from ground signals for maximum detection depth. It also provides Smartfind with the necessary high resolution target data to accurately plot targets.
Smartfind 2D Discrimination
Minelab’s exclusive 2D Discrimination technology analyses a target’s ferrous (Fe) and conductive (Co) properties simultaneously. This revolutionary approach is the most accurate technology available for determining whether a target is treasure or trash.
The information can be heard as different Fe-Co audio tones, as well as being displayed numerically and graphically on a 2D scale. Individual segments or larger areas of the display can be shaded to reject unwanted targets.